EPS molded corner protectors
DESCRIPTION OF MOLDED CORNER PROTECTORS
Range of molded corner protectors for the protection of 2 or 3-sided corners, manufactured with expanded polystyrene EPS foam, commonly known in Spain as Porexpan.
We have a wide range of models for 3-sided corners, e.g. for cabinets, as well as for 2-sided corners, e.g. for table tops, and 2-sided corners, e.g. for furniture side corners.
BENEFITS OF CORNER PROTECTORS
Our EPS expanded polystyrene molded corner pieces for packaging offer the advantage that their price/impact absorption ratio is the highest among all packaging materials.
Its low cost is due to the fact that it is manufactured with molds, already standardized for each model, which allows a mass production that lowers costs.
There are pyramid-shaped models, which can be fitted together and take up little space, both in the warehouse and in the packaging assembly area.
EPS molded corner protectors are a highly environmentally friendly material, as they are made from a high percentage of recycled material. In addition, it is only 2% plastic, the rest is air, which allows a high level of protection with a minimum use of plastic.
Its wide use makes it easier and easier to take it for recycling. Its recycling is very clean as it does not require water or high energy consumption, often it is only necessary to shred it and it can be used in e.g. insulation boards.
PROPERTIES OF CORNER PROTECTORS
It is not multi-impact, so its use will be restricted to logistics with little change of hands. 100% recyclable, reusable and non-polluting material.
It is a material that does not pick up humidity, nor does it affect or scratch the surfaces in contact. Normally the corner protectors are manufactured with a density of 20 kg/m3, although depending on its use it could be made in higher densities.
It is always white.
APPLICATIONS OF CORNER PROTECTORS
Its main use in packaging is in the furniture sector, but also in POP or displays and objects of regular shapes.
Do you want to know the price of this product?
Technical Data of EPS molded corner protectors
EPS molded corner protectors
|Ref.||Description||Interior measure||Exterior measure||Units per bag||Scheme|
|R003||Molded corner protector REF. 100-20||72x72x20 mm||100x100x53 mm||288|
|R004||Angular molded corner protector REF. A-15||49×49 mm||65x65x600 mm||200|
|R005||Angular molded corner protector REF. A-30||55×55 mm||85x85x700 mm||96|
|R008||Molded corner protector REF. 100-10||72x72x10 mm||100x100x30 mm||480|
|R011||Molded corner protector REF. 120-15||100x100x15 mm||120x120x43 mm||336|
|R012||Molded corner protector REF. 120-25||100x100x25 mm||120x120x63 mm||240|
|R014||Molded corner protector REF. 120-40||100x100x40 mm||120x120x80 mm||192|
|R286||Molded corner protector REF. 286||50x50x50 mm||64x64x64 mm||1000|
|R300||Molded corner protector REF. 300||55x55x55 mm||75x75x75 mm||1000|
|R425||Molded corner protector REF. 425||75x75x75 mm||105x105x105 mm||250|
|R490||Molded corner protector REF. 490||50x50x125 mm||65x65x140 mm||500|
|R626||Molded corner protector REF. 626||74x74x74 mm||90x90x90 mm||360|
|R780||Molded corner protector REF. 780||68x68x68 mm||90x90x90 mm||400|
|R980||Molded corner protector REF. 980||95x95x95 mm||115x115x115 mm||250|
|R985||Molded corner protector REF. 985||90x90x90 mm||115x115x115 mm||250|
WE MAKE RESISTANT PACKAGING
We reduce incident rates
We optimize packaging costs
SAVE UP TO
ASK US FOR A QUOTE
INCLUDES THE 6 STAGES OF THE LOGISTICS PROCESS
Form EPS molded corner protectors
Basic information on data protection
Responsible: BRAFIM MECPLAST, S.L.
Purposes : Manage the sending of information that you request. Sending commercial communications.
Legitimation: Consent. You can withdraw consent at any time.
Recipients: Your data will not be transferred to third parties except in case of legal obligation
Data subject's rights: To access, oppose, rectify and have their data deleted, as well as other rights as explained in the additional information.
You can access additional and extended information at this link.